Subtrim

The help for this page of the Version 2 transmitter, in its newest words. A transmitter on V2 B92 or older shows older words.

On the transmitter: Model setupSubtrim

Subtrim sets the exact centre of each servo for this model.

Touch a channel to choose it. Its box turns white.
Move the slider, or press '-' and '+'.
The servo moves as you go.
'Zero' puts the chosen channel back to 0.
'OK' keeps the changes and goes back to 'Model setup'.

Subtrim is the same in every bank.

Very large subtrims should not be needed. If one is, change the linkage so that a small amount is enough.

Subtrim always uses a multiplier of 5.
So changing the 'Trim multiplier' does not change any subtrim.

Still stuck?

See common questions, or write to mmessiter@gmail.com. Say which page, and what the screen showed.